- Index
- » Usage and Applications
- » OpenModelica Usage and Applications
- » Click on simulation -> nothing happens
Click on simulation -> nothing happens
Click on simulation -> nothing happens
Hello,
since a couple of years I´m using Dymola but I´m really do appreciate the work that is done on OpenModelica. So I installed OM 1.8 and the look and feel is great!
Platform: Windows XP.
I wanted to start with a very simple model (see screenshot). When I click on "check" everthing is fine: "Check of test completed successfully."
But when I click on "simulate" the simulation window pops up, then I click on "simulate!". Another window open for a short time but then nothing happens. No plot window appears...nothing.
Is there a parameter etc. that I might have forgotten to set?
I wanted to attach a screenshot but I doesn´t work either 
. Any hints? I used the "Attachments" link and chose a png-picture but then a have a white screen that won´t dissapear.
Thank you
Re: Click on simulation -> nothing happens
Hi,
It seems like you are using OMEdit. Can you check the messages window at the bottom and see if any error recorded there?
You can send an email with attachment to openmodelicadevelopers@ida.liu.se
Adeel.
- adeas
-
-
- 454 Posts
Re: Click on simulation -> nothing happens
OK. Then i will also need the log file. Please attach your omeditcommands.log file. You can find it in <your_temp_dir/OpenModelica/OMEdit>
Adeel.
- adeas
-
-
- 454 Posts
Re: Click on simulation -> nothing happens
OK, I now installed nighly build 10878.
I found the log file, I cannot post everything, but at least the beginning after opening OMEdit and the end when trying to simulate.
Code:
loadModel(Modelica,{"default"}) 08:17:53:743
true 08:17:56:103
Elapsed Time :: 2.36 secs
errors:=getMessagesStringInternal() 08:17:56:103
{} 08:17:56:306
Elapsed Time :: 0.203 secs
size(errors,1) 08:17:56:306
0 08:17:56:321
Elapsed Time :: 0.015 secs
loadModel(ModelicaReference,{"default"}) 08:17:56:321
true 08:17:56:353
Elapsed Time :: 0.032 secs
errors:=getMessagesStringInternal() 08:17:56:353
{record .OpenModelica.Scripting.ErrorMessage
info = record .OpenModelica.Scripting.SourceInfo
filename = "",
readonly = false,
lineStart = 0,
columnStart = 0,
lineEnd = 0,
columnEnd = 0
end .OpenModelica.Scripting.SourceInfo;,
message = "Requested package Modelica of version 3.2, but this package was already loaded with version 3.1. You might experience problems if these versions are incompatible.",
kind = .OpenModelica.Scripting.ErrorKind.scripting,
level = .OpenModelica.Scripting.ErrorLevel.warning,
id = 183
end .OpenModelica.Scripting.ErrorMessage;} 08:17:56:462
Elapsed Time :: 0.109 secs
size(errors,1) 08:17:56:462
1 08:17:56:462
Elapsed Time :: 0 secs
currentError:=errors[1] 08:17:56:462
record .OpenModelica.Scripting.ErrorMessage
info = record .OpenModelica.Scripting.SourceInfo
filename = "",
readonly = false,
lineStart = 0,
columnStart = 0,
lineEnd = 0,
columnEnd = 0
end .OpenModelica.Scripting.SourceInfo;,
message = "Requested package Modelica of version 3.2, but this package was already loaded with version 3.1. You might experience problems if these versions are incompatible.",
kind = .OpenModelica.Scripting.ErrorKind.scripting,
level = .OpenModelica.Scripting.ErrorLevel.warning,
id = 183
end .OpenModelica.Scripting.ErrorMessage; 08:17:56:462
Elapsed Time :: 0 secs
Code:
getSimulationOptions(Modelica.Electrical.Analog.Examples.Rectifier) 08:20:14:801
{0.0, 0.1, 10000, 1e-006, "dassl", "Modelica.Electrical.Analog.Examples.Rectifier", false, false, "", "mat", ".*", false, ""} /* startTime, stopTime, numberOfIntervals, tolerance, method, fileNamePrefix, storeInTemp, noClean, options, outputFormat */ 08:20:14:801
Elapsed Time :: 0 secs
buildModel(Modelica.Electrical.Analog.Examples.Rectifier,startTime=0.0, stopTime=1, numberOfIntervals=1000, method="dassl", tolerance=0.000001, outputFormat="mat") 08:20:23:426
{"",""} 08:20:24:613
Elapsed Time :: 1.187 secs
errors:=getMessagesStringInternal() 08:20:24:613
{} 08:20:24:629
Elapsed Time :: 0.016 secs
size(errors,1) 08:20:24:629
0 08:20:24:645
Elapsed Time :: 0.016 secs
getVersion() 08:21:32:752
"1.8.0 (r10787)" 08:21:32:815
Elapsed Time :: 0.063 secs
Re: Click on simulation -> nothing happens
The simulation of Modelica.Electrical.Analog.Examples.Rectifier is crashing and OMEdit doesn't check whether the executable was crashed or not. I have now fixed it in OMEdit so that it will show the error message if the simulation executable fails. You have to wait for the new nightly build now.
Adeel.
- adeas
-
-
- 454 Posts
- Index
- » Usage and Applications
- » OpenModelica Usage and Applications
- » Click on simulation -> nothing happens
